Quelle: You are not allowed to view links.
Register or
Loginhttp://www.mm.bot.sitew.com
Der mm.Bot ist ein sehr sicherer farm Bot da er komplett auf Pixelsearch basiert und nicht in den Speicher von Diablo 2 eingreift.
Der Bot ist jedoch nicht f?r Anf?nger geeignet , wenn ihr das erste mal einen Bot konfiguriert solltet ihr lieber zum D2NT Bot greifen ,der ist in 5mins eingestellt. Dieser hier ben?tigt etwas mehr geduld.
Installation des Bots:1. Ladet die Datei herunter und entpackt sie auf den Desktop und installiert die setup.exe
2. Installiere den mm.bot mod , dazu musst du die Datei
Supreme1012_Data_Mod_Installer ausf?hren und deinen Diablo 2 Pfad angeben , welcher abgefragt wird.( Beim Download Dabei)
Konfiguration des Bots:1. Stelle die Aufl?sung auf 1024x768 und die Farbtiefe auf 16bit
2. Versichere dich ,dass Diablo 2 im Direct Draw Modus l?uft, um das einzustellen ?ffne den "Diablo II video test" und stelle dort auf Direct Draw und nicht auf Direct 3D.
3. Die Aufl?sung in Diablo muss 800x600 sein.
4. Stelle alle grafik einstellungen auf low um die beste performance zu erreichen und deaktiviere effekte wie zb: regen
5. Anforderungen & Empfehlungen :
-> F?lle den G?rtel nur mti rejuvenation oder full rejuvenation pots.
-> Versichere dich ,dass sein Charakter in Akt 5 steht und das Anya WP offen ist
-> Dein Merc sollte am leben sein
-> Genug Gold zum Merc wiederbeleben (~200k gold w?ren gut)
-> Identifikations buch im Inventar
-> Der Charakter muss im "rennen" modus sein und nicht im "laufen" modus
6. So nun ?ffnet ihr die Datei \Config\mm.BOT.ini
;==============================================================================
;========= Manus-Magnus Diablo2 Lod Global MM.BOT.5.xx configuration ==========
;================= You are not allowed to view links.Register or Loginhttp://perso.wanadoo.fr/manus-magnus
=====================
;==============================================================================
; All lines starting with ";" are comments... All others are real variables...
;==============================================================================
[Processes]
;##############################################################################
;
; PROCESSES & KEYS USAGE
;
; * D2_Path => Specify your Diablo II path here (C:\Program Files\Diablo II)
; * D2_MultiKeys => <Yes> or <No>. If you got multiple Diablo2 keys for botting
; write Yes here and go complete the config\mm.MultiKeys.ini file. Simply!
;==============================================================================
D2_Path =C:\Program Files\Diablo II <- Hier euren Diablo 2 Pfad angeben
D2_MultiKeys = No
;==============================================================================
[Extra]
;##############################################################################
;
; EXTRA DELAYS & SCRIPTS SETTINGS
;
;==============================================================================
; *Extra_CreateGameDelay => Delay in milliseconds before each game creation.
;------------------------------------------------------------------------------
Extra_CreateGameDelay = 9000
;------------------------------------------------------------------------------
; *Extra_RunsAmount => Maximum of runs before PAUSE the bot and apply the
; Extra_RunsAmountSleepTime. If you got more than 1 Cd-Keys set the bot will
; swap Keys sets each time the Extra_RunsAmount is reached!
; *Extra_RunsAmountSleepTime => This is the PAUSE Delay in minutes that apply
; once the Extra_RunsAmount is reached.
;------------------------------------------------------------------------------
Extra_RunsAmount = 10
Extra_RunsAmountSleepTime = 15
;------------------------------------------------------------------------------
; *Extra_RDGNE_SleepTime => PAUSE in minutes when IP BAN/Realm Down happen.
; NOTE: If you got more than 1 Cd-Keys set: the bot will swap Keys each time
; A IP BAN/Realm Down happen!
;------------------------------------------------------------------------------
Extra_RDGNE_SleepTime = 20
;------------------------------------------------------------------------------
; *Extra_RDGNE_Executable => Will execute this file ( example: IpReset.vbs )
; *Extra_RDGNE_ExecutablePath => Full path of this File ( example: C:\tests )
; NOTE:Executable & ExecutablePath serve IP RESET Script purpose...
;------------------------------------------------------------------------------
Extra_RDGNE_Executable = No
Extra_RDGNE_ExecutablePath = No
;------------------------------------------------------------------------------
; *Extra_D2LogsDelete => If "Yes" will systematicly delete D2 logs files...
;------------------------------------------------------------------------------
Extra_D2LogsDelete = No
;==============================================================================
; Fast help about settings above...
;==============================================================================
; CONSIDERING AROUND 1 MINUTE / RUN: (TWEAK IF YOUR RUN TIME IS DIFFERENT...)
;------------------------------------------------------------------------------
; 1/ IF YOU GOT ONLY 1 CD KEY SET:
; - Use the default settings above: the bot will make 10/ runs and sleep 15/
; minutes. If a Realm Down or IP ban happen it will sleep 20/ minutes...
; 2/ IF YOU GOT 2 CD KEY SETs: try 13/10/20
; 3/ IF YOU GOT 3 CD KEY SETs or more: 15/0/20
; 4/ IF YOU WANT TO GO MORE FAST, using IP reset script : 15/0/0
; (if you got an Ip Reset Script you can setup Extra_RDGNE_SleepTime = 0)
;------------------------------------------------------------------------------
; DONT FORGET THAT BLIZZARD ALLOWING A MAXIMUM OF 20 GAMES / HOUR / KEY SET...
;==============================================================================
;##############################################################################
;
; Optional scripts settings...
;
; Dedicated to third party or various scripting need.
; Example: PreLogin_Executable = Test.vbs
; *PreLogin/PostLogin/GameStart_Executable => The file ( ex: test.vbs )
; *PreLogin/PostLogin/GameStart_ExecutablePath => The file path ( ex: C:\tests )
;------------------------------------------------------------------------------
; Put "No" if you dont wanna use the option. Note: RUN WAIT is done.
;==============================================================================
; *PreLogin_Executable => Will be executed just before click "Connect to Bnet".
;------------------------------------------------------------------------------
PreLogin_Executable = No
PreLogin_ExecutablePath = No
;------------------------------------------------------------------------------
; *PostLogin_Executable => Will be executed after character selection.
;------------------------------------------------------------------------------
PostLogin_Executable = No
PostLogin_Executablepath = No
;------------------------------------------------------------------------------
; *GameStart_Executable => Will be executed at the very start of each new game.
; Only the corpse check/recovery and optional Server IP check are done before.
;------------------------------------------------------------------------------
GameStart_Executable = No
GameStart_ExecutablePath = No
;==============================================================================
[Character]
;##############################################################################
;
; GLOBAL CHARACTER & GAME PARAMETERS
;
; * Char_Mode => Mode <Single> for single player or <Battle> for battle.net.
; ==> <SEQ> special mode will help for sequences building: the bot will
; directly run the sequences that are in the mm.BOT.Sequences.ini file. Thats
; means you have launch Diablo 2 yourself (via a shortcut with the correct
; parameters: -direct -txt -w -ns -title "Diablo II" ) and to put your char
; just after the desired TP or WP. Once done; launch the mm.bot.5xx.exe.
; * Char_Account => Your account (Only required if <Battle> mode selected)
; * Char_Password => Your password (Only required if <Battle> mode selected)
; * Char_Slot => Character position in account screen (<1> to <8>)
; * Char_Difficulty => Difficulty: <Normal>, <Nightmare> or <Hell>
; * Char_BNGamePass_String => Suit of keys the bot will use randomly
; to create your games names and passes. You can put the same key multiple
; times (not too much). Set 20+ characters, Personalize it, dont use spaces.
; * Char_BNGameName_Perso => If the parameter is different than "No" the bot
; will take the passed string adding incremented number behind it (1,2..etc..)
; as the new game name creation string, ignoring Char_BNGamePass_String.
; Char_BNGamePass_Perso => Will take this string as default game password
; if Char_BNGameName_Perso is different than "No"... Attention: Personalized
; Game Pass must contains more than 2 alpha numeric characters (a-z / 0-9)
; * Char_MessageSent => /dnd is recommended since messages from wispers have
; colors that -will- disturb the bot! Will be applied at each new cycle.
; Default is here /o igw that should be used with the \tools\FList utility.
; * Char_StartRunDelay => Hightly randomised delay at the absolute start of
; each run, when -in game- status is detected. (50-150)
;==============================================================================
Char_Mode = Battle
Char_Account = MyAccountName <- Accname
Char_Password = MyPassword <- Das Passwort von eurem Account
Char_Slot = 1 <- wo sich euer Char bei der Charakter Auswahl befindet ( 1-8)
Char_Difficulty = Hell <- Schwierigkeitsgrad
Char_BNGamePass_String = abcdefghijklmnopqrstuvwxyz0123456789-_
Char_BNGameName_Perso = No
Char_BNGamePass_Perso = No
Char_MessageSent = /away botting
Char_StartRunDelay = 100
;==============================================================================
;##############################################################################
;
; LIFE AND MERC PREFERENCES
;
; * Char_MalahHealLifePercent AND Char_MalahHealManaPercent => The life or
; Mana needed to heal at Heal NPC (10% step precision, minimum 10% mana,
; less than 10% will make the bot ignore mana need, and minimum 50% for life)
; * Char_DrinkPotionLifePercent AND Char_DrinkPotionManaPercent => The Life or
; Mana percent needed to drink Potion (10% step precision....)
; * Char_UseMerc => Detect and ressurrect merc if dead <Yes> or <No>
; * Char_HealMerc => Will gave rejuv to merc if life is ~1/3 <Yes> or <No>
; * Char_PreventiveChicken => Chicken if, after a drink the bot see there
; is only 1 column of potions left ? <Yes> or <No>
; * Char_StopIfNoPots => Stop the bot if no more pots in belt ? <Yes> or <No>
; * Char_MaxDrinks => Maximum of drinks allowed per sequence (ie: Eldritch
; attack sequence) if this number is overrided the bot will chicken.
; * Char_CharHealTimer => Minimum time interval in ms between 2 char drinks.
; * Char_MercHealTimer => Minimum time interval in ms between 2 merc drinks.
; * Char_MercWeaponSwitch => Will switch merc weapon when resurrect (infinity!)
;==============================================================================
Char_MalahHealLifePercent = 80
Char_MalahHealManaPercent = 60
Char_DrinkPotionLifePercent = 50
Char_DrinkPotionManaPercent = 10
Char_UseMerc = Yes
Char_HealMerc = Yes
Char_PreventiveChicken = Yes
Char_StopIfNoPots = Yes
Char_MaxDrinks = 4
Char_CharHealTimer = 400
Char_MercHealTimer = 800
Char_MercWeaponSwitch = Yes
;==============================================================================
;##############################################################################
;
; GAMBLE & DIABLO CLONE PREFERENCES
;
; * Char_StashGold => How much in inventory before stashing it ?
; * Char_GambleItem => Gambled item can be <Rings> OR <Amulets> OR <Circlets>
; * Char_GambleGoldStart => Gold amount to start gamble at Gamble NPC
; * Char_GambleGoldStop => Gold amount to stop gamble at Gamble NPC (>200k)
; * Char_GambleDelay => Delay before scan & iding, dont go below 800...
;==============================================================================
; * Char_IpFinderLastByte1,2,3 => Last byte of the server you are looking for.
; If good server is detected the bot will repeat the Precast Sequence Over &
; Over: thats means you need to have "cast in town" sequence to allow IDLE.
; As example Holy shield for pala, frozen armor for sorce, or others... Usage
; is No to ALL if you are NOT looking for a specific server. However put simple
; Bytes (ie: 66) if you search server(s). You can check up to 3 different IP.
; * Char_IpFinderExecutable => Name of the executable/script to launch when IP
; is found. (ie: MyWav.wav or MyScript.bat...)
; * Char_IpFinderExecutablePath => full path of the executable (ie: C:\MyFolder)
; NOTE: D2 window is re-maximized once your script/wav terminated to properly
; continue the IDLE using Precast to prevent bot focuse loose. Dont use a script
; or sound that runs too long. If ip found splash screen will spawn automaticly.
; NOTE: Make D2Clone appears at Eldtich and carry him to Shenk (easy kill).
;==============================================================================
Char_StashGold = 300000
Char_GambleItem = Rings
Char_GambleGoldStart = 1800000
Char_GambleGoldStop = 300000
Char_GambleDelay = 1200
;==============================================================================
Char_IpFinderLastByte1 = No
Char_IpFinderLastByte2 = No
Char_IpFinderLastByte3 = No
Char_IpFinderExecutable = No
Char_IpFinderExecutablePath = No
;==============================================================================
;##############################################################################
;
; DEFAULT INVENTORY & REPAIR PREFERENCES
;
; * Char_MiniFreeSpaces => At how much free spaces letf in inventory the bot
; will stop. Never let the bot continue to run while inventory & stash are full.
; NOTE: If you make multiple monsters and pickup rare you should have 24+ !
; If you are only pickup few uniques you can decrease the value to 12-16.
;==============================================================================
; * Char_ForceRepairCycle => Will force a repair to Larzuk every xx runs.
; If value = 0 auto check repair is activated at the start of each run.
; Damaged armors/Helms/etc... And -melee- weapons are automaticly detected.
; Its recommended to force/define a cycle, since the auto check burn ~500 ms
; If you have a sorce give 100 (repair every 100 runs...It's an example.)
;==============================================================================
Char_MiniFreeSpaces = 16 <- Wenn nur noch diese Anzahl an Inv slots frei ist stopt der Bot
;==============================================================================
Char_ForceRepairCycle = 100
;==============================================================================
;##############################################################################
;
; KEYBOARD SETTINGS/KEYS
;
; * Char_Key_ClearScreen => The key for "clear screen" (look in controls)
; * Char_Key_Switch => The key you use to switch weapons (CTA or Eshield Switch)
; * Char_Key_AutoMap => The keyboard key you use to show the automap
; * Char_Key_Inventory => The keyboard key you use to view inventory
; * Char_Key_ShowItems => The keyboard key you use to view items on the floor
; * Char_Key_PotionsRow1 => Key for Potion 1 (from left to right)
; * Char_Key_PotionsRow2 => Key for Potion 2 (from left to right)
; * Char_Key_PotionsRow3 => Key for Potion 3 (from left to right)
; * Char_Key_PotionsRow4 => Key for Potion 4 (from left to right)
; NOTE : Example of keys: <SPACE>, <SHIFT>, <ALT>, <CTRL>, <F1>, <z>, <6>...
; NOTE : Use -simple- keys like SPACE or a, b, c, z.. instead of F1, F2, ALT
; if you are experiencing problems. Because -simple- keys can be more 'fast'.
; NOTE : Only rejuvenations potions are picked & recongnized by the BOT
; => Fill up the belt with REJUV / FULL REJUV potions before launching the bot.
; => If you want only drink full rejuvs edit the Xrare section of mm.PkId.ini.
;==============================================================================
; Am besten ihr stellt eure Hotkeys so ein wie sie hier aufgelistet sind:
Char_Key_ClearScreen = k
Char_Key_Switch = a
Char_Key_AutoMap = TAB
Char_Key_Inventory = i
Char_Key_ShowItems = SPACE
Char_Key_PotionsRow1 = x
Char_Key_PotionsRow2 = c
Char_Key_PotionsRow3 = v
Char_Key_PotionsRow4 = b
;==============================================================================
[Advanced Settings]
;##############################################################################
;
; MOUSE AND KEYBOARD DIABLO 2 DELAYS/SENSIVITY
;
; If you dont know leave these settings as default.
; * (A)D2_FastClickDelaysRange = <mini>,<maxi> => Fast Clicks are most "actions"
; clicks like attacks, moves, hide mouse...etc.. this is the randomized time
; from <mini> to <maxi> in milliseconds mouse will be pressed: down,delay,up.
; * (B)D2_SlowClickDelaysRange = <mini>,<maxi> => Slow Clicks category, same thing
; as above, but this concern only slow speed required delays like out-of-game
; menus, Npc menus, repair button...etc...
; * (C)D2_MouseClickDownDelay => Length a click is held down before release (ms).
; This delay is the autoit minimum press time for all clicks.
; * (D)D2_SendKeyDownDelay => Length a key is held down before release (ms).
; This delay is the autoit minimum press time for all keys.
; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
; All these delays can be tweaked to fix problems OR to increase performances:
; => Total Click time = (C) + (A OR B) + little value (internal & randomized)
; => Total Press Key time = (D) + little value (internal & randomized)
; D2 game have a worst sensivity for clicks and keypresses on low speed comps.
; Increasing a few (C) or/and (D) if you think the game does not receive
; properly the clicks/keys orders, Also search around for all others settings
; like delays in sequences.
; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
; Test these delays if you need speed: A = 10,15, B = 120,140, C & D = 15
;==============================================================================
D2_FastClickDelaysRange = 20,30
D2_SlowClickDelaysRange = 120,140
D2_MouseClickDownDelay = 20
D2_SendKeyDownDelay = 20
;==============================================================================
;##############################################################################
;
; INTERACTS DELAYS
;
; If you dont know leave these settings as default.
; * Char_CheckMoveDelay => End of move detection Delay; more is low, more it
; will increase moves reactivity. If too much low the interacts or moves can
; become erratics...(milliseconds). Only concern walk/run moves
; - Try - values starting from 80 to 300 with steps of 20
; NOTE: Char_CheckMoveDelay IS AN IMPORTANT FACTOR OF OPTIMIZATION !!
; * ItemFocusDelay => time to wait before starting an iding scan, too much low
; delay can cause iding errors, too much high is time loss. >5 and <200.
; Usually is as low as computer is fast.
; * Weot_MiniDelay => When using the WEOT command: Minimum delay to wait before
; starting to check if the teleport was done or not. >300 and <800
; * Weot_ScanDelay => When using the WEOT command: Delay between each scan. A
; scan serve to check if teleport was effective or not. >40 and <500
; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
; Test this delay if you need speed: Char_CheckMoveDelay = 90
; If you got a sorce with fast cast rate test this: Weot_MiniDelay = 350
;==============================================================================
Char_CheckMoveDelay = 120
ItemFocusDelay = 70
Weot_MiniDelay = 700
Weot_ScanDelay = 100
;==============================================================================
Im Prinzip ist der gro?teil selbsterkl?rend man muss sich nur Zeit nehmen.
7. Als n?chstes ?ffnet ihr die \Config\mm.Bot.Sequences.ini , dort k?nnt ihr Sequencen erstellen was f?r Bosse euer Bot machen soll, voreingestellt findet man dort ein LightSorc script f?r Pindle, eldtrich und shenk runs. Wie man Sequencen selbst erstellt erkl?r ich sp?ter, aber man findet im Internet genug sequencen f?r einige Bosse. F?r Sequencen die man nicht selbst gemacht hat ist eigentlich nur dieser Teil wirklich intressant:
@TP_Scroll_Key = h ; TP Scroll Skill key (must have it and a TP tome...)
@Teleport_Key = s ; Teleport Skill Key (must have it)
@Lightning_Key = f ; Lightning Skill Key (must have it)
@Chain_Lightning_Key = g ; ChainLightning Skill Key (must have it)
@Frozen_Armor_Key = r ; Frozen Armor Skill Key (put a blank if you dont have)
@Mana_Shield_Key = e ; Mana Shield Skill Key (put a blank if you dont have)
@Battle_Commands_Key = t ; Battle Commands Skill Key (leave blank if you dont have)
@Battle_Orders_Key = y ; Battle Orders Skill Key (leave blank if you dont have)
Hier werden die Hotkeys f?r die Attacken definiert, also diese m?sst ihr mit eurem Charakter abstimmen.
In Documents/htm/SeqCommands.html findet ihr eine sehr detaillierte anleitung zum Sequencen selber erstellen.
8. Die mm.PKID.ini Datei zu finden im Config ordner, gibt euch die M?glichkeit die Pickit einzustellen, also welche Items euer Char aufnehmen soll und welche er liegen lassen soll bzw verkaufen.
Um die Pickit zu verstehn schaut ihr euch am besten foglende Datei an: Documents/htm/PkIdSyntax.html , dort wird die Pickit ganz genau erkl?rt.
nachdem ihr etwas in der Pickit ver?ndert habt m?sst ihr die datei noch aktualisieren mit der Config/mmcl.PKID.Compiler.exe (einfach ausf?hren)
9. Nun k?nnt ihr die mm.bot.5xx.exe starten
Hinweis: Der ganze Bot ist sehr umfangreich, wenn ihr selbst sequencen erstellen wollt und mehr ?ber die Einstellungen wissen wollt lest am besten die Anleitung welche beim Download dabei ist (English).
[gelöscht durch Administrator]
